The Extreme Floor Fibre was designed with a dense knit fibre to tackle stubborn dirt and grease on smooth hardwearing floors inside or outside of the home.

Offering a deep-cleaning action, the fibres loosen dirt and grease and the highly absorbent nature of the Extreme Floor Fibres hold and remove it with just water.

Floor Types for the Extreme Floor Fibre

Outdoor floors such as slate, textured PVC, decking, concrete, swimming pools and garage flooring. We do not recommend the Extreme Floor Fibre for freshly oiled and delicate surfaces.

Fibre Composition

Knitted material, classic jacquard (long pile). 100% polyester.

How to Use Your Extreme Floor Fibre

If your Extreme Floor Fibre is new, we always recommend washing your fibre before use.

Cleaning your floors with the Extreme Floor Fibre only requires water and your Floorcleaner.

The super-absorbent nature of the Extreme Floor Fibre means it generally needs more water to clean the surface. As with the Allpurpose and High Gloss Floor Fibre, the dirtier the floor, the more water you will need.

Simply wet the Extreme Floor Fibre under a tap and use your ENJO Spray Trigger Bottle to apply more water as you clean. If using outside hose the area is necessary.

If used on indoor floors we recommend cleaning in an ‘S’ motion and drying off afterwards with Allpurpose or High Gloss Floor Fibre (depending on your floor type).

For exterior cleaning move back and forth without applying pressure.

How to Care for Your Extreme Floor Fibre

Our Extreme Floor Fibre is long-lasting, simply follow our care instructions to ensure it’s in tip-top cleaning condition.

We recommend washing your Extreme Floor Fibre after each use. Simply pop it into the laundry bag provided and wash with detergent only (no softener needed). We recommend washing our cleaning fibres between 40-60 degrees.

How to Clean Your Floors with ENJO’s Outdoor Floor Fibre