Step 1
Secure the Window Multi Tool Fibre on to the Multi Tool Hardware.
Step 2
Attach the Rubber Blade and Channel, ensuring it faces away from the Fibre in the opposite direction.
Step 3
Using ENJO Trigger Spray Bottle, spray the Window Multi Tool Fibre and the glass.
Step 4
Clean the window using an up and down motion.
Step 5
For high windows, attach the Multi Tool to the Telescopic Pole. Slide the e-Clip out of the Cap at the bottom of the Multi Tool. Twist and pull to remove the Cap. Insert the Multi Tool into the Telescopic Pole, align the holes and re-insert the e-Clip to lock in place. Twist the Telescopic Pole anticlockwise to adjust the height then twist clockwise to lock.
For hard-to-reach windows, adjust the angle by attaching the Twister between the Multi Tool and Telescopic Pole. Slide the e-Clip out of the Cap at the bottom of the Multi Tool handle. Twist and pull to remove the Cap. Insert the Twister, aligning the holes and re-insert the e-Clip to lock in place. Then insert the Telescopic Pole into the Twister. Slide yellow component of Twister towards Telescopic Pole handle and twist to lock into place. Push in side button of Twister to adjust angle as required.
Step 6
Turn the Multi Tool over and use the Rubber Blade to dry the glass working from top to bottom.
Step 7
Use the Window Miracle (folded in 4) to dry off Rubber Blade between passes and to remove any drips or marks left on the glass.