Step 1
Make sure the BBQ is cool before you begin.
Step 2
Fill ENJO Trigger Spray Bottle with cold tap water. Spray the exterior of the BBQ and the Extreme Side (logo) of the Outdoor Glove and clean the exterior in a circular motion.
Step 3
Flip to the Textured Side to clean any hard to remove dirt.
Step 4
Dry off with the Outdoor Miracle (folded in 4).
Step 5
Use the BBQ scraper to remove any excess grease and built-up grime on the hot plate and grill.
Step 6
Spray the Textured Side of the Outdoor Glove then clean using a circular motion to lift and loosen grime.
Step 7
Flip to the Extreme Side (logo) of the Outdoor Glove. Spray and wipe over the surface again.
Step 8
For stubborn grime, add Marble Paste^ to the Extreme Side (logo) of the Outdoor Glove and clean.
Step 9
Rinse the Outdoor Glove and wipe away excess Marble Paste with the Extreme Side (logo) of the Outdoor Glove.
Step 10
Dry with the Outdoor Miracle (folded in 4).
^Not suitable for Perspex or plated silver, always test on an inconspicuous area first.
NOTE: If Fibres are visibly saturated with dirt, we recommend soaking (or giving Fibres a pre-clean) to remove the majority of dirt built-up dirt prior to machine washing.