Step 1
To assemble the Floorcleaner, place the Floorcleaner Head on the floor with the collar pushed down. Guide Telescopic Pole into the collar. Twist clockwise until it clicks in place.
Step 2
Place the Dust Floor Fibre on the floor (Fibre Side down). Guide the Floorcleaner Head into one side of the Fibre. Click the ‘open’ lever and raise the Floorcleaner Head to guide into the opposite side of the Floor Fibre, click the ‘close’ lever. Lift the yellow collar of the Floorcleaner, exposing the swivel joint. To adjust the height of the Telescopic Pole, gently twist the Telescopic Pole anti-clockwise to release, then raise to nose height and gently twist clockwise to secure at the desired height.
Step 3
Sweep using an 'S' motion to trap dust and debris into the Fibre. Note: Larger dirt particles will be collected into a pile for removal with a dust pan.
Step 4
To remove Dust Floor Fibre, park your Floorcleaner by positioning the Floorcleaner collar down. Press the ‘open’ lever and lift Floorcleaner out of the Dust Floor Fibre. Shake Dust Floor Fibre outside to dispose of dust.
Step 5
Attach the appropriate cleaning Floor Fibre for your flooring as per Step 1 - for matte floors use the Allpurpose Floor Fibre and for shiny floors use the High Gloss Floor Fibre.
Step 6
With water, spray the Floor Fibre and the floor with the ENJO Trigger Spray Bottle.
Step 7
Clean floor using an 'S' motion adding more water as required. Allow the floor to air dry.