Step 1
Place the Outdoor Floor Fibre on the floor (Fibre Side down). Guide the Floorcleaner Head into one side of the Fibre. Click the ‘open’ lever and raise the Floorcleaner Head to guide into the opposite side of the Floor Fibre, lowering the Floorcleaner Head and click the ‘close’ lever. Lift the yellow collar of Floorcleaner, exposing the swivel joint. To adjust the height of the Telescopic Pole, gently twist the Telescopic Pole anti-clockwise to release then raise to nose height and gently twist clockwise to secure at the desired height.
Step 2
Use the Floorcleaner to sweep any debris from the area first. With water, thoroughly wet the stained area using a hose if necessary. Using the ENJO Trigger Spray Bottle spray the Outdoor Floor Fibre.
Step 3
Use a back and forth motion to loosen and lift dirt from the floor with the Outdoor Floor Fibre.
Step 4
To remove the Outdoor Floor Fibre, park your Floorcleaner by positioning the Floorcleaner collar down. Press the ‘open’ lever and lift Floorcleaner out of the Outdoor Floor Fibre.
Step 5
Attach the Extreme Floor Fibre to the Floorcleaner, as per Step 1 above.
Step 6
Attach the Extreme Floor Fibre to the Floorcleaner, as per Step 1 above.