How does the Multi Tool work?
The Multi Tool is designed to be compatible with a range of different ENJO Multi Tool Fibres. Each fibre has a different composition of raw materials and weave to suit different types of surfaces or dirt levels. Ergonomically designed for a comfortable clean without chemicals or a bucket. ENJOtex Fibres are 100x finer than a single human hair and work to loosen dirt from surfaces in your home with just water by capillary action. Simply wet the fibre or your surface and work the Multi Tool to clean the surface.
Does the Multi Tool Hardware come with a warranty?
The Multi Tool Hardware comes with a 24 month warranty and 60 day money back guarantee.
Can you attach other ENJO Hardware to the Multi Tool Hardware?
Yes, the Multi Tool Hardware easily attaches to the
Telescopic Pole
and Twister
to suit different cleaning requirements.
How do I attach the Multi Tool to the Twister and Telescopic Pole?
Remove the black e-Clip by sliding outwards (located at the bottom of the Multi Tool handle). Twist and pull to remove the yellow end cap, insert the Telescopic Pole, align the holes then re-insert the e-Clip to lock the pole in place.
Slide the e-Clip out of the Cap at the bottom of the Multi Tool handle. Twist and pull to remove the Cap. Insert the
Twister, aligning the holes and re-insert the e-Clip to lock in place. Insert the Telescopic Pole into the Twister, sliding the yellow ring upwards to lock in place. Push the button on the side of the Twister to adjust angle as required.
Does the Telescopic Pole, Twister, Spray Bottle and Multi Tool Hardware have a warranty?
Yes, all ENJO Hardware comes with a 24 month warranty against faulty workmanship.
How do I attach the Multi Tool Fibres to the Mutli Tool Hardware?
To attach the Fibre, slide the right side of the Multi Tool Plate into the right back pocket of the Fibre. Holding the left side loop, lift the Fibre over the opposite end of the plate to hold securely in place.
Can I use my Window Multi Tool Fibre with other cleaning products?
How do I attach the Window Multi Tool to my Telescopic Pole?
Remove the black e-Clip by sliding outwards (located at the bottom of the Multi Tool handle). Twist and pull to remove the yellow end cap, insert the
Telescopic Pole, align the holes then re-insert the e-Clip to lock the pole in place.
How do I assemble my Window Multi Tool Hardware?
Your Multi Tool Hardware will arrive fully assembled. To change the direction of the Blade, press the round, yellow push button on the Multi Tool (this will release the Blade), rotate the Blade 180° then re-insert, locking into place.
To attach the fibre, slide the right side of the Multi Tool Plate into the right side pocket of the fibre. Holding the left side loop, lift the fibre over the opposite end of the plate to hold securely in place.
How do I wash my Multi Tool Fibres?
Wash your Multi Tool Fibres (and any other ENJOtex Fibres) in your
ENJO Laundry Bag
at 40–60°C with a natural detergent and leave to air dry. Avoid fabric softeners and tumble drying.
How often should I wash my Multi Tool Fibres?
After light cleaning tasks such as spot cleaning, rinse with hot water and allow to air dry. We recommend machine washing your Multi Tool Fibres after thoroughly cleaning. If the fibres are heavily soiled soak first in warm water before machine washing, avoid allowing dirty fibres to dry before washing.
Our dust fibres generally need to be washed less often than our other fibres as they stay dry. Following light dusting tasks simply shake or vacuum the fibre clean to reuse. When you start to notice your Dust Multi Tool Fibre is looking a little grey and less fluffy, it’s become saturated with dust and is ready to be washed.
Can I use my Multi Tool Fibres with other cleaning products?
How do I attach the Multi Tool to the Telescopic Pole?
Remove the black e-Clip by sliding outwards (located at the bottom of the Multi Tool handle). Twist and pull to remove the yellow end cap, insert the
Telescopic Pole, align the holes then re-insert the e-Clip to lock the pole in place.